Canon XA45 XA40 XA45 Instruction Manual - Page 105
Powered IS Button], Set WB Priority], Focus/Zoom Ring Operation], Focus Ring Direction]
View all Canon XA45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Menu Options • The tele-converter increases the focal length by a factor of approximately 1.5 while the wide attachment decreases it by a factor of approximately 0.75. • When you select a setting other than [j Off], the AF mode is automatically set to [@ Normal AF]. • The approximate focusing distance displayed on the screen will change depending on the setting. If you are not using an optional conversion lens, select [j Off]. [Powered IS Button]: Determines the operation mode of the assignable button set to [È Powered IS] (A 63). [Î Press and Hold]: Powered IS will be activated while you hold the button pressed down. [Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off. [Set WB Priority]: Convenient for times when you need to use a particular white balance setting frequently. You can press an assignable button set to [Ä WB Priority] to switch between the current white balance and the white balance setting selected for [Set WB Priority]. [Focus/Zoom Ring Operation]: Selects whether to enable or disable the focus/zoom ring's operation. [Focus Ring Direction]: Changes the direction the focus/zoom ring needs to be turned when focusing. This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is set to FOCUS). [Focus Ring Response]: Selects the sensitivity of the response when focusing using the focus/zoom ring. This setting affects the focus/zoom ring only when using it to adjust the focus (when the focus/ zoom ring switch is set to FOCUS). [Zoom Ring Direction]: Changes the direction the focus/zoom ring needs to be turned when using it to adjust the zoom (when the focus/zoom ring switch is set to ZOOM). [IR Light]: Turns the infrared light on and off. The light is located on the handle unit so make sure you attach it to the camcorder in advance. • If set to [i On], the infrared light is always on when the camcorder is in infrared mode. 105 [É Playback Setup] menu ( mode only) Menu item [¸ Data Code] [{ Data Code] Setting options [j Off], [% Date] [j Off], [% Date], [& Time], [ [{ Camera Data] Date and Time], A y [Data Code]: For clips, displays the date a clip was recorded. For photos, displays the date and/or time or camera setting used when a photo was recorded.