Canon XA45 XA40 XA45 Instruction Manual - Page 94

6Video Output CEonxfitgeurartnional Connections External Connections Video Output Configuration The video signal output from the SDI OUT terminal (s only) and HDMI™ OUT terminal depends on the clip's video configuration and on various menu settings. The video signal output from the HDMI 94 OUT terminal can also change depending on the capabilities of the connected monitor. s The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminal simultaneously. Operating modes: Video Output Configuration (Recording) Recording video configuration Scan mode setting1 Resolution Frame rate Maximum resolution setting2 P 3840x2160 29.97P 23.98P 1920x1080 1280x720 (59.94P) PsF - P 1920x1080 59.94P 29.97P 23.98P PsF 1920x1080 1280x720 (59.94P) - 1280x720 59.94P - - Video output configuration Resolution 1920x1080 Frame rate Same as that for video configuration3 Color sampling 1280x720 1920x1080 1920x1080 720x4805 59.94P SDI output4: 29.97PsF (59.94i) HDMI output: 59.94i Same as that for video configuration3 YCbCr 4:2:2 8 bit 1280x720 1920x1080 1280x720 59.94P SDI output4: 29.97PsF (59.94i) HDMI output: 59.94i 59.94P YCbCr 4:2:2 10 bit 1 > [£ Display Setup] > [SDI/HDMI Scan Mode] (s) or [HDMI Scan Mode] (t) setting. 2 For HDMI output: > [£ Display Setup] > [HDMI Max Resolution] setting. s For SDI output: > [£ Display Setup] > [SDI Output] setting. 3 The frame rate is 59.97P during slow & fast motion recording. 4 s only. 5 HDMI output only. Only when the frame rate is set to 59.97P. Automatically selected depending on the capabilities of the connected monitor.