Canon XA45 XA40 XA45 Instruction Manual - Page 99

Audio Output Audio Output The camcorder can output audio from the SDI OUT terminal (s only), HDMI OUT terminal, × (headphone) terminal or speaker (monaural; mode only). When recording or playing back clips recorded with 4-channel audio, you can select the 2-channel output. Audio output configuration MP4 audio format1 Audio configuration of the Audio output configuration 99 recorded clips s SDI OUT terminal HDMI OUT terminal [ LPCM 16bit 4CH] [ AAC 16bit 2CH] 4-channel linear PCM, 16 bit 2-channel AAC, bit rate: 256 kbps 4-channel linear PCM, 24 bit 2-channel linear PCM, 16 bit 1 [3 Recording Setup] > [¸ Audio Format] setting. Operating modes: Selecting the Audio Channels for Headphone or Speaker Output You can select the 2-channel output from the × (headphone) terminal or speaker. 1 Select [Monitor Channels]. > [¡ # Audio Setup] > [Monitor Channels] 2 Select the desired option and then select [X]. • The options show combinations of audio channels output from the left and right (L/R), respectively. Options with a "+" sign ([CH1+2], for example) indicate a mix of two audio channels on the same side. Selecting the Audio Channels for HDMI Output The audio signal output from the HDMI OUT terminal will be 2-channel linear PCM audio (16-bit, 48 kHz sampling). 1 Select [HDMI Channels]. > [¡ # Audio Setup] > [HDMI Channels] 2 Select the desired option and then select [X]. NOTES • If you set an assignable button to [Monitor Channels] (A 85), you can press the button to toggle between the audio channel output options.