Canon imageCLASS D1150 imageCLASS D1180/D1170/D1150/D1120 Starter Guide - Page 7
Load the paper stack of the appropriate size, Fan the paper stack and even the edges. - paper settings
View all Canon imageCLASS D1150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3 Hold the lock release lever of the side paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. The side paper guides move together. 2 Set Up the Machine 5 Fan the paper stack and even the edges. - Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc. - A6 size paper cannot be loaded. 4 Hold the lock release lever of the rear paper guide (A) and slide the guide to the mark for the size of the paper to be loaded. 6 Load the paper stack of the appropriate size with the print side facing up. Align the rear edge of the paper stack with the rear paper guide. - When loading paper, be careful not to cut your fingers on the edges of the paper. - Make sure the paper stack does not exceed the load limit mark (A) and (B). - Make sure to set the guide to the mark for the size of the paper to be loaded correctly. If the guide is positioned incorrectly, it may cause paper jams, dirty prints, etc. - A6 size paper cannot be loaded. - The paper cassette holds approximately 500 sheets of paper (21 lb (80 g/m2)). 7 Hold the paper cassette with both hands and set it back into the machine.