Canon imageCLASS MF3010 VP imageCLASS MF3010/ MF3010 VP Users Guide - Page 170

Troubleshooting The Copy Output is Hardly Readable and Copied Poorly 85RS-03U Is the output tray slot blocked? YES Remove all the obstructions. NO Is the document or paper loaded properly? YES Is the appropriate paper loaded into the machine? YES Have you removed the sealing tape from the toner cartridge? YES Is the toner cartridge installed properly? YES Is there sufficient toner in the toner cartridge? YES Have you cleaned the scanning components or fixing unit? YES Are you copying on the correct? NO ● Load the document properly. " Placing Documents(P. 43) " ● Load the paper properly. " Loading Paper(P. 46) " NO Load the type of paper that meets the paper specifications. " Supported Paper Types(P. 70) " NO Remove the sealing tape from the toner cartridge. " Attention (Replacing the Toner Cartridge)(P. 210) " NO Install the toner cartridge properly. " Replacing the Toner Cartridge(P. 206) " NO To view the onscreen instructions, see the following. " Replacing Toner Cartridges(P. 202) " NO Clean the scanning components or fixing unit. " Cleaning the Machine(P. 193) " YES Make sure to select the appropriate side of paper to copy your document on, as the side to be placed face up in the paper source varies depending on the paper type that you are using. If the copy result is not satisfactory, try to copy your document on the other side. 165