Canon imageCLASS MF3010 VP imageCLASS MF3010/ MF3010 VP Users Guide - Page 218

Maintenance Special Mode Use the Special Mode settings to fix print quality problems. Read the following carefully before changing the settings. IMPORTANT Use default settings in normal operation Change the settings only when the problems noted below occur. 85RS-060 Settings That Can Be Specified From the Operation Panel Settings Default settings are highlighted in bold. Special mode Special Mode b Special Mode c Special Mode d Options Details 0 Off Due to the paper type or usage conditions, vertical streaks appear on the output. 1 Mode 1 When this occurs, change this setting. The effect becomes greater as the number goes up. -> -> -> -> 2 Mode 2 (low) (high) Streaks can be minimized by changing the paper type or usage 3 Mode 3 conditions, without needing to change the setting. The more effective the setting, the lower the density becomes. 4 Mode 4 Additionally, the outline of text and images may be reproduced less clearly, and images may appear slightly jagged. 0 Off Vertical streaks appear on the output after the toner cartridge was replaced recently, or the machine has not printed anything for an extended period of time. 1 Mode When this occurs, change this setting. 1 The effect becomes greater as the number goes up. Mode 2 2 -> -> -> (low) (high) 3 Mode 3 Streaks can be minimized by changing the paper type or usage conditions, without needing to change the setting. The more effective the setting becomes, the slower the print speed. 0 Off Due to the paper type or usage conditions, paper curls or creases. When this occurs, change this setting. 1 Mode The effect becomes greater as the number goes up. 1 -> -> (low) (high) Mode 2 2 Paper curls and creases can be minimized by changing the paper type and usage conditions, without needing to change the setting. This setting can be selected when 213