Canon imageFORMULA CR-L1 User Manual - Page 41

See Confirming Proper Document Feeding, on p. 24., adjustments if required.

Get Canon imageFORMULA CR-L1 PDF manuals and user guides View all Canon imageFORMULA CR-L1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

F Adjust the gap between the feeding roller and the separation roller to optimum width. While one sheet remains in place between the rollers, continuously attempt to slide the second sheet (in front of the remaining sheet) to the right, back through the roller gap. Slowly turn the paper thickness adjustment dial clockwise (right) just until the second sheet stops feeding into the gap. Second sheet does not feed into the gap. IMPORTANT Turning the Adjustment Dial clockwise too much may damage the rollers. G Remove the sheets from the paper path and close the Maintenance Cover. H Confirm that the document feeds properly. See "Confirming Proper Document Feeding," on p. 24. If additional assistance is required, contact your local authorized Canon dealer or service representative. I Place a marking label on the unit pointing to the adjustment dial as illustrated below. This will serve as a reference point for future adjustments if required. Marking labels for thickness adjustment dial 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
41
F
Adjust the gap between the feeding roller and the separation roller to
optimum width.
While one sheet remains in place between the rollers, continuously
attempt to slide the second sheet (in front of the remaining sheet) to the
right, back through the roller gap.
Slowly turn the paper thickness adjustment dial clockwise (right) just until
the second sheet stops feeding into the gap.
IMPORTANT
Turning the Adjustment Dial clockwise too much may damage the rollers.
G
Remove the sheets from the paper path and close the Maintenance
Cover.
H
Confirm that the document feeds properly.
See “Confirming Proper Document Feeding,” on p. 24.
If additional assistance is required, contact your local authorized Canon
dealer or service representative.
I
Place a marking label on the unit pointing to the adjustment dial as
illustrated below. This will serve as a reference point for future
adjustments if required.
Second sheet does not feed
into the gap.
Marking labels for thickness
adjustment dial