Canon imageFORMULA CR-L1 User Manual - Page 7
Turning ON and OFF the Power
View all Canon imageFORMULA CR-L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Turning ON and OFF the Power Follow the procedures below to turn the scanner power ON and OFF. Turning ON the Power A To turn ON the scanner, slide the Power Switch to the right. B Windows recognizes the CR-L1 as new hardware, and installation starts automatically. (Windows 7) NOTE The CR-L1 will be registered as "CANON CR-L1 USB" in the Imaging Device directory. (ON) IMPORTANT • When you turn ON the power, the power LED flashes slowly, and then turns solid. • If the scanner does not work, there is a problem with the scanner. Turn OFF the power, and contact your local authorized Canon dealer or service representative to have the scanner serviced. WARNING If you hear strange sounds, detect smoke or abnormal heat, sense a vibration, or smell odd odors around the scanner, turn OFF the power immediately and disconnect the power cord from the power outlet. Contact your local authorized Canon dealer or service representative to have the scanner serviced. Turning OFF the Power A Turn OFF your computer. B To turn OFF the scanner, slide the Power Switch to the right. (OFF) CAUTION • Wait at least 10 seconds before turning the scanner back ON. • For your safety, disconnect the power plug from the power outlet if you are not using the scanner for a long period of time. NOTE The scanner's auto power off setting is enabled by default, and the scanner will turn off automatically if it is not operated for 4 hours. For details on how to disable this setting, see "Auto Power Off," on p. 27 7