Canon imagePROGRAF iPF765 Setup Guide - Page 12

29 Click Install. 30 After installation is completed, click Quit. 31 Click the iPF Support icon in the Dock. 32 When clicking the User's Manual button, the User Manual will be opened and clicking the Paper Reference Guide button, the Paper Reference Guide will be opened. The User Manual is now installed. Store Accessories in the Pockets 1 Use the manual pocket to store the Basic Guide (which includes descriptions of basic printer operations, routine maintenance, and troubleshooting tips), so you can refer to it as needed. 2 When using the stand, store the 3-inch paper core attachment and other accessories in the accessory pocket. • The accessory pocket is included with MEMO the stand. Responding to Messages Error messages may appear on the display screen of the control panel during printer installation in some cases. If so, it may not indicate a problem with the printer, and the issue may be easily resolved. Common messages and the causes are listed here with corrective actions. To respond to error messages other than these, refer to the Basic Guide. For other detailed printer instructions, refer to the User Manual installed at "Install the Printer Driver and the User Manual". Message No ink tank loaded. Check ink tank. No printhead Install printhead. Paper is crooked. Push the release lever back, then Pull out the cut sheet. Could not detect paper size. Push release lever back, Pull out the cut sheet. Insert the maintenance cartridge. Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ERROR Exxx-xxxx (x represents a letter or number) Cause There is no ink tank of the indicated color in the printer. The printhead is not installed. The loaded paper is crooked. The paper is loaded in the wrong position or the paper is curled. The maintenance cartridge is removed. Another kind of error has occurred. You may have encountered an error that cannot be resolved. Corrective Action Load or reload the ink tank. (see steps 4-11 on page 3) Install the printhead. (see steps 1-9 on page 3-4) 1. Press the release lever backwards. 2. Pull out the paper. 3. Pull the release lever forward. 4. Load or reload the paper. Install the maintenance cartridge correctly. Turn off the printer and wait at least three seconds before restoring the power. If the message still appears, write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. Write down the error code and message, turn off the printer, and contact your Canon dealer for assistance. 12