Canon imagePROGRAF iPF765 Setup Guide - Page 2

Preparations Prepare the printer for use by installing the printer and connecting the power cord. 1 Install the printer. Assemble the stand and install the printer referring to the Printer Stand Setup Guide included with the stand. 2 Remove the packing materials from the top of the printer. 3 Three people should hold the printer's carrying handles and place the printer on a table or other flat location. • The iPF760/iPF765 weighs approximately Caution 52 kg by itself. Moving the printer requires at least three people. Be careful to avoid back strain and other injuries. • When moving the printer, firmly grasp the carrying handles. Holding the printer at other positions is dangerous, and may cause injury and damage if the printer is dropped. 4 Remove the orange tape used to secure the roll holder to the printer. 5 Move the printer to the location where you will use it. • When moving the stand, lift the support rod Caution to the position (a) before closing the output stacker and unlocking the 4 casters. Failure to do so may lead to scratched flooring, damage to the basket cloth, and injury. • After you have moved the stand, be sure to lock the 4 casters. a 6 Plug the power cord into the power supply connector on the right of the printer and plug the other end into the outlet. OFF ON Install the Ink Tanks Load all six ink tanks. 1 Press the power button to turn on the printer. 2 When the following screen appears, use the ▲ and ▼ keys to select a language and press OK. Language 㪈㪆㪉 English Data Message ᣣᧄ⺆ Français Italiano Deutsch 3 Select your local time zone and press OK. Time Zone 㪈㪆㪌 0:London (GMT) +1:Paris,Rome +2:Athens,Cairo Data +3:Moscow Message +4:Eerevan,Baku Load FEED Cut Power Menu Back Stop Navigate 2