Canon imagePROGRAF iPF785 MFP M40 User Guide - Page 373

Handling and Use of Paper iPF785 Attaching the Roll Holder to Rolls • When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recommend Important wearing clean cloth gloves when handling rolls to protect the printing surface. • Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll. • Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems. • For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper Note Sizes.") ➔P.362 (See "Displaying the Paper Reference Guide.") ➔P.366 • To view instructions as you attach the Roll Holder, press the Navigate button. (See "How to View Instructions with Navi- gate.") ➔P.443 1 Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indicated (b), remove it from the Roll Holder. Handling rolls 2 Insert the respective attachments for the roll paper core on the Roll Holder and Holder Stopper. • Using rolls with a 2-inch paper core Holder Stopper (Left Side) Align the tips (a) of the 2-Inch Paper Core Attachment with the holes (b) of the Holder Stopper and insert it firmly. Roll Holder (Right Side) No attachment is needed. 373 User's Guide