Canon imagePROGRAF iPF785 MFP M40 User Guide - Page 464
Pri. DNS SrvAddr, DNS Dync update
View all Canon imagePROGRAF iPF785 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
Menu Settings iPF785 GL2 Settings Line & Pen Manager Setting Item Ln wdth correct Description, Instructions Corrects by using a correction value that specifies the pen width. You can configure Black/gray and Color for each group. The specified range is -20 to +20. ProcessingOption Warning On-the-Fly Select On to have any GL2-related warnings displayed. Selecting On will start printing jobs sooner if you are printing only HP RTL print jobs and printing would not start until later. However, images may be incomplete in some cases, so be sure to check the printing results. Control Panel Detect img size Sets the method of deciding the region to output in order to print efficiently while avoiding missing images. If Off is selected and the data contains image range information, the image range information is followed. If Off is selected and the data does not contain image range information, a size with the maximum roll paper width of the printer for the width and 1.5 times the maximum roll paper width for the length is used. If Command priority is selected and the data contains image range information, the image range information is followed. If Command priority is selected and the data does not contain image range information, the detected minimum image area is used. If Detected size is selected, the detected minimum image area is used. Printer Menu GL2 Set Print Print GL2 settings information. Interface EOP Timer Setup Specify the timeout period before cancellation of print jobs that cannot be received by the printer. TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is configured automatically or a static IP address is entered manually. Protocol DHCP BOOTP Specify the protocol used to configure the IP address automatically. RARP IPv4 Settings IP Address Subnet Mask Default G/W Specify the printer network information when using a static IP address. Enter the IP address assigned to the printer, as well as the network subnet mask and default gateway. The value that was automatically configured is displayed if you have set IPv4 Mode to Automatic. DNS DNS Dync update Settings Specify whether DNS server registration is updated automatically. Pri. DNS SrvAddr Specify the DNS server address. Sec. DNS SrvAddr DNS Host Name Specify the DNS host name. DNS Domain Name Specify the DNS domain name. IPv6 IPv6 Support Specify whether to connect via IPv6. IPv6 StlessAddrs Specify whether a IPv6 stateless address is used. 464 DHCPv6 Specify whether DHCPv6 settings are used. DNS Settings DNS Dync update Statefull Specify whether DNS server registration is updated auto- Addr matically. User's Guide