Canon imagePROGRAF iPF785 MFP M40 User Guide - Page 466
Rep.P.head Print, Keep Paper Size
View all Canon imagePROGRAF iPF785 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 466 highlights
Menu Settings System Setup Paper Size Basis Setting Item Roll Selection 1 Roll Selection 2 Keep Paper Size Control Panel Printer Menu TrimEdge Reload Rep.P.head Print Nozzle Check Use USB 466 Use Ethernet Use RemoteUI iPF785 Description, Instructions If roll size detection is activated, choose whether ISO A3 (297mm) or 300mm Roll is applied when a roll of an intermediate width is detected. If roll size detection is activated, choose whether 10in. (254mm) or JIS B4 (257mm) is applied when a roll of an intermediate width is detected. Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to give priority to margin settings. The larger value is used if the margin specified in the printer driver does not match the margin in the printer menu. Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.572 In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Choose 10 pages to check once per 10 pages. Choose Off to not execute check. If On is selected in Warning, a warning may be displayed on the Control Panel depending on the result of the nozzle check. When Off is selected, the device can no longer be accessed via USB. When Off is selected, the device can no longer be accessed via Ethernet. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. User's Guide