Canon imagePROGRAF iPF785 MFP M40 User Guide - Page 461
B:Standard/Draft, Head Cleaning B
View all Canon imagePROGRAF iPF785 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
iPF785 Adjust Printer Feed Priority Setting Item Adj. Auto(OtherPaper) Quality Manual Adjust Length AdjustmentPrint A:High B:Standard/Draft Change A:High Settings B:Standard/Draft Mainte- Head Cleaning nance Nozzle Check Replace P.head Repl. maint cart GL2 Settings Head Info Quality Color Manager Mode Monochrome Color (CAD) 1 Color (CAD) 2 Color (CAD) 3 Color (CAD) 4 Color (CAD) 5 Menu Settings Description, Instructions The printer prints and reads a test pattern for automatic adjustment of the feed amount. Note that this function takes more time and consumes more ink than Auto(GenuinePpr). (See "Automatic Banding Adjustment.") ➔P.580 Use this mode with highly transparent media or other paper for which Auto(GenuinePpr) or Auto(OtherPaper) cannot be used. Print a test pattern for adjustment of the feed amount based on the type of paper. (See "Manual Banding Adjustment.") ➔P.582 Print a test pattern for particular types of paper to compensate for paper stretching or shrinkage, after which you enter the amount of adjustment. (See "Adjusting Line Length.") ➔P.584 Control Panel Displayed when you have selected Feed Priority > Adj. Priority > Print Length. Adjustment relative to the amount of stretching or shrinkage of the current paper. Enter either the adjustment results from AdjustmentPrint or the discrepancy that you measured (as a percentage). For paper that tends to stretch, increase the feed amount by choosing a higher adjustment value. For paper that tends to shrink, decrease the feed amount by choosing a lower adjustment value. (See "Adjusting Line Length.") ➔P.584 Printer Menu Clean the Printhead. (See "Cleaning the Printhead.") ➔P.598 Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances. Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by Head Cleaning A. Print a test pattern to check the nozzles. Execute when replacing the Printhead. Follow the instructions displayed to complete the required procedure. (See "Replacing the Printhead.") ➔P.599 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. Execute when replacing the Maintenance Cartridge. Follow the instructions displayed to complete the required procedure. (See "Replacing the Maintenance Cartridge.") ➔P.606 Indicates information about the printhead. Print in monochrome. Print in standard colors. Print with approximate colors emulating Canon iPF750, iPF755, iPF650, iPF655, iPF760, iPF765.(*2) Print with approximate colors emulating Canon iPF500, iPF600, iPF700, iPF510, iPF610, iPF710, iPF605, iPF720, iPF810, iPF820, iPF815, iPF825.(*2) Print emulating the HP Designjet 500/800, in colors resembling colors produced by these printers.(*2) 461 Print emulating the HP Designjet T1100, in colors resembling colors produced by this printer.(*2) User's Guide