Canon imagePROGRAF iPF785 MFP M40 User Guide - Page 650
HP-GL/2 jobs are printed in monochrome (or color)
View all Canon imagePROGRAF iPF785 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 650 highlights
HP-GL/2 jobs are printed in monochrome (or color) iPF785 HP-GL/2 jobs are printed in monochrome (or color) Cause The Color Mode setting in the Control Panel menu is incorrect. Corrective Action Check the Color Mode setting in the Control Panel menu. (See "Menu Settings.") ➔P.457 However, for optimal Printhead performance, the printer consumes trace amounts of color ink even when Monochrome is selected as Color Mode. Printed colors of lines are inaccurate during HP-GL/2 printing Cause AdjustFaintLines is On in the Control Panel menu. Corrective Action Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected results. However, lines in some colors may appear broken. HP-GL/2 jobs are printed 6 mm larger than specified Cause The page size of the HP-GL/2 print job, as created in the source application, is incorrect. Corrective Action In the Control Panel menu, set Oversize to Off. (See "Menu Settings.") ➔P.457 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified Cause The page size of the HP-GL/2 print job, as created in the source application, is incorrect. Corrective Action Set Detect img size to Command priority or Detected size in the Control Panel menu. (See "Menu Settings.") ➔P.457 Set Conserve Paper to On in the Control Panel menu. (See "Menu Settings.") ➔P.457 HP-GL/2 printing takes a long time Cause Large print jobs with a lot of data take longer to print. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. Corrective Action Please wait a while until printing is finished. In the Control Panel menu, set Input Resolution to 300dpi and print again. (See "Menu Settings.") ➔P.457 The printer stops when printing a HP-GL/2 job (the carriage stops moving) Cause The printer is analyzing the print job. Corrective Action Please wait a while until printing is finished. A job was printed when Input Resolution in the Control Panel menu was set to 600dpi. In the Control Panel menu, set Input Resolution to 300dpi and print again. (See "Menu Settings.") ➔P.457 Troubleshooting HP-GL/2 problems 650 User's Guide