Canon imagePROGRAF iPF785 MFP M40 User Guide - Page 649
HP-GL/2 problems, With HP-GL/2, printing is misaligned
View all Canon imagePROGRAF iPF785 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 649 highlights
iPF785 With HP-GL/2, printing is misaligned HP-GL/2 problems With HP-GL/2, printing is misaligned ...649 Lines or images are missing in printed HP-GL/2 jobs 649 Lines are printed too thick or thin in HP-GL/2 print jobs 649 HP-GL/2 jobs are printed in monochrome (or color 650 Printed colors of lines are inaccurate during HP-GL/2 printing 650 HP-GL/2 jobs are printed 6 mm larger than specified 650 HP-GL/2 jobs are printed at maximum size, even if a standard size is specified 650 HP-GL/2 printing takes a long time ...650 The printer stops when printing a HP-GL/2 job (the carriage stops moving 650 With HP-GL/2, printing is misaligned Cause The plotter origin is incorrect. The Margin setting in the Control Panel menu is incorrect. Corrective Action Check the printing commands. Set Detect img size to Command priority or Detected size in the Control Panel menu. Adjust the Margin setting values in the Control Panel menu. Troubleshooting Lines or images are missing in printed HP-GL/2 jobs. The memory is full. Cause Corrective Action Check the size of the data in the print job. An HP-GL/2 command not supported by this printer was received. Check the print job and settings. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔P.457 The plotter origin is incorrect. Oversize in the Control Panel menu is set to Off. Set Detect img size to Command priority or Detected size in the Control Panel menu. (See "Menu Settings.") ➔P.457 Set Oversize to On in the Control Panel menu. (See "Menu Settings.") ➔P.457 HP-GL/2 problems Lines are printed too thick or thin in HP-GL/2 print jobs Cause The Width setting in the Control Panel menu is incorrect. ThickenFineLines in the Control Panel menu is set to Off. The Ln wdth correct setting in the Control Panel menu is incorrect. Corrective Action Change the Width setting configured in Pen no. of the Palette A or Palette B selected in the Control Panel menu. (See "Menu Settings.") ➔P.457 If fine lines are printed faintly, setting ThickenFineLines to On will print the lines more distinctly. (See "Menu Settings.") ➔P.457 Change the Ln wdth correct setting in the Control Panel menu. (See "Menu Settings.") ➔P.457 649 User's Guide