Canon imageRUNNER ADVANCE C5250 imageRUNNER ADVANCE C5200 Srs Basic Operation - Page 94
Removing Punch Waste (External 2/3 Hole Puncher-B2
View all Canon imageRUNNER ADVANCE C5250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Removing Punch Waste (External 2/3 Hole Puncher-B2) This section describes how to remove punch waste from the puncher. When the punch waste tray of the Puncher becomes full, a screen prompting you to remove the punch waste appears on the touch panel display. Follow the procedure described below to remove the punch waste. • The External 2/3 Hole Puncher-B2 is an optional product. • The External 2/3 Hole Puncher-B2 is available only when the Staple Finisher-J1 or Booklet Finisher-J1 is attached. 1 Pull out the punch waste tray. 1. Open the front cover of the puncher. 2. Pull out the punch waste tray. 2 Discard the punch waste. Make sure that the punch waste tray is completely emptied. 94
94
Removing Punch Waste (External
2/3 Hole Puncher-B2)
This section describes how to remove punch waste from the puncher.
When the punch waste tray of the Puncher becomes full, a screen prompting you to remove the punch waste appears on the
touch panel display. Follow the procedure described below to remove the punch waste.
•
The External 2/3 Hole Puncher-B2 is an optional product.
•
The External 2/3 Hole Puncher-B2 is available only when the Staple Finisher-J1 or Booklet Finisher-J1 is attached.
1
Pull out the punch waste tray.
1
2
1. Open the front cover of the
puncher.
2. Pull out the punch waste
tray.
2
Discard the punch waste.
Make sure that the punch waste tray is completely emptied.