Casio EX-TR100WE User Guide - Page 111
Power Supply, Charging
View all Casio EX-TR100WE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Power Supply Charging . If the camera's back lamp starts flashing red... If the back lamp starts flashing red during charging, it means that further charging is not possible for one of the reasons below. Perform the actions described below to correct the problem and then try charging again. Ambient temperature or the temperature of the battery is abnormally high or low Unplug the USB cable from the camera and wait for a while until the camera is within the temperature range of 5°C to 35°C (41°F to 95°F), and then try charging again. Safety timer activated A battery that has not been used for a long time, certain types of computers, and connection conditions can cause charging to take longer than normal. If charging takes longer than about six hours, a safety timer will terminate it automatically, even if the battery is not fully charged. If the battery has not been used for a very long time, charging may terminate automatically after only about 45 minutes. 1) Using a battery that has not been used for a long time. Disconnect and then reconnect the USB cable to resume charging. 2) Insufficient power supply when connected to computer Connect directly to a USB port what supplies a current of 500mA. For details about the power supply capacity of a computer's USB port, contact the manufacturer of the computer. Though disconnecting and then reconnecting the USB cable will resume charging, you may need to do so repeatedly if the power supply capacity of the computer is low. If problems continue to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center. 111 Appendix