Casio EX-TR100WE User Guide - Page 19

5. Connect the USB cable to the camera. The back lamp should light red, indicating that USB-AC adaptor charging has started. The back lamp will go out when charging is complete. [USB] port • It takes about 130 minutes to bring a fully dead battery to a full charge. • A battery that has not Small connector USB cable (included with camera) been used for a long time or ambient temperature extremes can cause charging to take longer than Making sure that the 8 mark on the USB cable connector is towards the side opposite that of the monitor screen, connect the cable to the camera. normal. If charging takes longer than about six hours, a timer will terminate it automatically, even if the battery is not fully charged. This is indicated by the back lamp flashing red. If the battery has not been used for a very long time, charging may be terminated automatically and the back lamp may start flashing red after only about 45 minutes. In either case, disconnect the USB cable from the camera and then reconnect it to resume charging. • Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration. Back Lamp Operation Lamp Status Description Lit Red Charging Flashing Red Abnormal ambient temperature, USB-AC adaptor problem, or battery problem (page 111), or charging terminated by the timer Off Charging complete Back lamp 6. After charging is complete, disconnect the USB cable from the camera and then unplug the adaptor from the power outlet. 19 Quick Start Basics