Casio WK-6500 User Guide - Page 106
Saving Digital Keyboard Data to a, Memory Card
View all Casio WK-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Using a Memory Card 4. Use the R-17 (t, y) buttons to move the 0 to "CardFormat". 5. Press the R-16 (ENTER) button. • This will cause the confirmation message "Sure?" to appear. 6. Press the R-14 (YES) button to format the memory card or the R-14 (NO) button to cancel. • The message "Please Wait" will remain on the display while the format operation is being performed. Do not perform any Digital Keyboard operation while this message is on the display. "Complete" appears on the display after formatting is complete. • Formatting may take as long as a few minutes to complete. Saving Digital Keyboard Data to a Memory Card To save Digital Keyboard data to a memory card 1. Insert the memory card into the card slot. 2. If the Digital Keyboard is in the card mode, press the C-7 (CARD) button to exit the card mode. 3. Depending on the type of data you want to save to the memory card, perform one of the steps shown below. • All setup registration banks are saved as a batch. Other data is saved in area (data item) units. To save this type of data: Do this: One user rhythm 1. Press the L-9 ([F] USER RHYTHMS) button. 2. Use the dial or R-14 (-, +) buttons to specify the user rhythm number. One user tone 1. Press the R-12 ([L] USER TONES) button. 2. Use the dial or R-14 (-, +) buttons to specify the user tone number. One user DSP 1. Perform steps 1 through 4 under "To use a DSP" (page E-36). 2. Use the dial or R-14 (-, +) buttons to specify the user DSP number (101 through 200). One user preset 1. While holding down the L-7 ([D] WORLD/ VARIOUS) button, press the L-8 ([E] PIANO RHYTHMS) button to display the music preset screen. 2. Press the L-9 ([F] USER RHYTHMS) button. 3. Use the dial or R-14 (-, +) buttons to specify the user preset number. One song sequencer song 1. Press the C-3 (SONG SEQUENCER) button to enter the song sequencer mode. 2. Use the dial or R-14 (-, +) buttons to specify the song number. All registration banks Press the C-8 (BANK) button to display the registration bank selection screen. 4. While holding down the R-13 (FUNCTION) button, press the C-7 (LOAD/SAVE) button. • This causes an "Xxxx Load"*1 screen like the one shown below to appear. The sample screen below shows the screen that appears from the rhythm screen. E-104