Casio XJ-S41 Owners Manual - Page 19
About the Signal Specific Setting Unit - xga projector
UPC - 079767178826
View all Casio XJ-S41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting Name Input Vertical Position Horizontal Position Frequency RCV RCV R Setting Unit Signal Specific Signal Specific Signal Specific Description Use this sub-menu to adjust the vertical position of the input source image within the projection area. Use this sub-menu to adjust the horizontal position of the input source image within the projection area. When vertical bands appear in the projected image while RGB is selected as the input source, it means that the frequency setting is not correct. When this happens, use this setting to adjust the frequency manually. Phase R Signal Specific Video Mode RCV Source Specific Restore Menu Defaults RCVU Source Specific Important! If, for some reason, your manual frequency settings cause the image input from the computer to disappear from the projection, you can press the [AUTO] key to perform an auto adjust operation, which should cause the image to appear. When there is flickering in the projected image while RGB is selected as the input source, it means that the phase setting is not correct. When this happens, use this setting to adjust the phase manually. This setting is valid when VIDEO is selected as the input source. Use it to select a mode that is optimized for movies or still images. Normal*: Optimized for movies. Still Image: Optimized for still images. In particular, this setting should be used when projecting still images from a digital camera connected to the projector's VIDEO terminal. Use this sub-menu to return all of the sub-menu items on the Image Adjustment main menu to their initial default settings. z Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source. z "Image Adjustment" main menu "Vertical Position", "Horizontal Position", "Frequency", and "Phase" defaults can be restored for the current signal type (XGA/60Hz, SXGA/60Hz,etc.) only. About the "Signal Specific" Setting Unit For the items that have "Signal Specific" in the "Setting Unit" column of the above table, the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is being input when the setting is performed, and not for a specific input source. 19