Cisco 7008P Installation Guide - Page 6
Installing the Cisco SFS 7008P Switch into a Rack
View all Cisco 7008P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installing the Cisco SFS 7008P Switch into a Rack Figure 3 LIM and Fabric Module Connections Fabric card in slot 9 Fabric card in slot 10 Fabric card in slot 13 Fabric card in slot 14 LIM card in slot 1 LIM card in slot 2 LIM card in slot 3 LIM card in slot 4 LIM card in slot 5 LIM card in slot 6 LIM card in slot 7 LIM card in slot 8 154550 Installing the Cisco SFS 7008P Switch into a Rack This section describes how to install the Cisco SFS 7008P switch in an equipment rack. If you purchased the custom Cisco SFS 7008P switch shelf, follow the directions in the Cisco SFS 7008 InfiniBand Server Switch Hardware Installation Guide. To mount the Cisco SFS 7008P switch chassis in an industry-standard rack, follow these steps: Step 1 Install a shelf for the chassis as shown in Figure 4, if you have not already done so. The shelf must support the weight of the chassis, which can be up to 106 pounds if all possible components are installed. Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note 6 78-17434-01 Rev. A0