Cisco 7936 Administration Guide - Page 37

Chapter 2 Setting Up the Cisco Unified IP Conference Station 7936 Preparing to Install Adding Cisco Unified IP Conference Stations Manually If you want to assign specific directory numbers to your Cisco Unified IP Conference Stations without using auto-registration, you must manually add each station to the Cisco Unified CallManager database. If you are not using Dynamic Host Configuration Protocol (DHCP) in your network, you must also manually configure the IP settings and Trivial File Transfer Protocol (TFTP) server on each station. Alternatively, you can use DHCP, and manually set the TFTP server. In this case, wait for the station to start up using DHCP, and then re-assign the TFTP server. Using DHCP If you are using DHCP in your network without auto-registration, you must manually add the Cisco Unified IP Conference Station to the Cisco Unified CallManager database. To manually add the Cisco Unified IP Conference Station to the network, follow these steps. For additional information, refer to the Cisco Unified CallManager documentation or online help. Procedure Step 1 Step 2 Step 3 Step 4 Step 5 Start Cisco Unified CallManager Administration. Add a Cisco Unified IP Conference Station to Cisco Unified CallManager by selecting Device > Add a New Device. The Add a New Device page displays. Choose Phone from the Device Type drop-down list box, and click Next. The Add a New Phone page displays. Choose the Cisco 7936 phone type and click Next. The Phone Configuration page displays. Enter the required fields. OL-10751-01 Cisco Unified IP Conference Station 7936 Administration Guide 2-5