Cisco 7936 Administration Guide - Page 70

Accessing Network Configuration Settings Chapter 3 Configuring the Cisco Unified IP Conference Station 7936 Table 3-2 System Verification Steps on the Cisco Unified Conference Station (continued) System Setting DSCP Call Ctl DSCP Config DSCP Services Description Usage Notes Indicates the DSCP classification for protocol interfaces that are used in Cisco Unified CallManager-to-device communications. This parameter is assigned through Cisco Unified CallManager. Interfaces the DSCP classification This parameter is assigned through Cisco for any SCCP-based phone Unified CallManager. configuration, including any TFTP, DNS or DHCP access that is necessary for phone configuration. Indicates the DSCP classification for IP phone services on SCCP-based phones, including any HTTP traffic. This parameter is assigned through Cisco Unified CallManager. Accessing Network Configuration Settings You must log in through the Admin Setup menu in order to access the IP Conference Station network settings. To access the network settings, follow these steps: Procedure Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Press the Menu button. Press the Up or Down scroll button to select the Admin Setup menu. Press the Select button. Enter the administrator password. (The default administrator password is **#.) Press the Enter softkey. Press the Up or Down scroll button to select Network Setup, and then press the Select button. Cisco Unified IP Conference Station 7936 Administration Guide 3-8 OL-10751-01