Cisco AIR-RM1252G-A-K9= Hardware Installation Guide - Page 31
Unpacking the Access Point, Package Contents
UPC - 882658140860
View all Cisco AIR-RM1252G-A-K9= manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Chapter 2 Installing the Access Point Unpacking the Access Point Warning The access point, antennas, and all interconnected equipment including the associated LAN connections must be located indoors within the same building. Statement 375 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Unpacking the Access Point Follow these steps to unpack the access point: Step 1 Step 2 Step 3 Open the shipping container and carefully remove the contents. Return all packing materials to the shipping container and save it. Ensure that all items listed in the "Package Contents" section are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative. Package Contents Each access point package contains the following items: • Cisco Aironet 1250 series access point • Mounting hardware kit - One mounting plate, two 4 x 40 x 3/16 in screws, and a mounting plate latch (all attached to the access point) - Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts. - Four 8 x 18 x 3/4 in pan head Phillips sheet metal screws - Four #8 plastic wall anchors - One 10 x 24 nut (for ground stud on the mounting plate) - Two cable tie wraps • Product quick start guide • Product translated safety warning document • Cisco product registration and Cisco documentation feedback cards OL-8247-03 Cisco Aironet 1250 Series Access Point Hardware Installation Guide 2-3