Cisco AIR-RM1252G-A-K9= Hardware Installation Guide - Page 62
Inserting a Radio Module
![]() |
UPC - 882658140860
View all Cisco AIR-RM1252G-A-K9= manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Inserting a Radio Module Chapter 2 Installing the Access Point Inserting a Radio Module Note To install or remove a radio module, the access point must be removed from the mounting plate. Follow these steps to insert a radio module: Step 1 Ensure the module latch is in the fully open position (see Figure 2-27). Note If the module latch is not in the open position, the latch will not allow the module to be closed. Step 2 Carefully insert the access point module rails into the radio module slots (see Figure 2-26). Figure 2-26 Inserting the Radio Module 170300 1 2 1 Radio module slot on access point 2 Radio module 34 3 Access point module rail 4 Radio module rail slot 2-34 Cisco Aironet 1250 Series Access Point Hardware Installation Guide OL-8247-03
![](/manual_guide/products/cisco-airap1252agak9-hardware-installation-guide-0adef5e/62.png)