Cisco ASR1002 Configuration Guide - Page 334
Viewing the VRF Configuration, Viewing Detailed VRF Information for the Management Ethernet VRF
UPC - 882658196416
View all Cisco ASR1002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
Common Ethernet Management Tasks Using the Management Ethernet Interface • Domain Name Assignment, page 6 • DNS service, page 6 • RADIUS or TACACS+ Server, page 6 • VTY lines with ACL, page 7 Viewing the VRF Configuration The VRF configuration for the Management Ethernet interface is viewable using the show running-config vrf command. This example shows the default VRF configuration: Router# show running-config vrf Building configuration... Current configuration : 351 bytes vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! (some output removed for brevity) Viewing Detailed VRF Information for the Management Ethernet VRF To see detailed information about the Management Ethernet VRF, enter the show vrf detail Mgmt-intf command: Router# show vrf detail Mgmt-intf VRF Mgmt-intf (VRF Id = 4085); default RD ; default VPNID Interfaces: Gi0 Address family ipv4 (Table ID = 4085 (0xFF5)): No Export VPN route-target communities No Import VPN route-target communities No import route-map No export route-map VRF label distribution protocol: not configured VRF label allocation mode: per-prefix Address family ipv6 (Table ID = 503316481 (0x1E000001)): No Export VPN route-target communities No Import VPN route-target communities No import route-map No export route-map VRF label distribution protocol: not configured VRF label allocation mode: per-prefix Setting a Default Route in the Management Ethernet Interface VRF To set a default route in the Management Ethernet Interface VRF, enter the following command Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4