Cisco ASR1002 Configuration Guide - Page 89
DETAILED STEPS, ip tftp, source-interface GigabitEthernet 0, copy tftp
UPC - 882658196416
View all Cisco ASR1002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Software Upgrade Process ISSU Upgrade for Redundant Platforms DETAILED STEPS Command or Action Step 12 ip tftp source-interface gigabitethernet slot/port Example: Router(config)# ip tftp source-interface gigabitethernet 0 Step 13 copy tftp: URL-to-target-location copy source-file-system:filename standby-destination-filesystem Purpose Specifies the Gigabit Ethernet TFTP source-interface to be configured: slot/port-Specifies the location of the TFTP source-interface. Note To copy a file using TFTP through the Management Ethernet interface, the ip tftp source-interface GigabitEthernet 0 command must be entered before entering the copy tftp command. Copy the consolidated package onto the active RP. Step 14 Example: Router# copy tftp bootflash: copy source-file-system:filename standby-destination-filesystem Copy the consolidated package onto the standby RP. Example: Step 15 Router# copy bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33. XNA1.bin stby-bootflash: dir URL-to-target-location dir URL-to-target-stby-location Example: (Optional) Display the contents of the target directories to confirm the successful copy of the file package. Step 16 Router# dir bootflash: Router# dir stby-bootflash: issu loadversion rp upgrade-rp-number standby-file-system:filename Load the target consolidated package onto the standby RP. Example: Router# issu loadversion rp 1 file stby-bootflash:asr1000rp1-adventerprisek9.02.01.01.12 2-33.XNA1.bin After you receive the message indicating that the terminal state has been reached, go on to Step 17. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7