Cisco RV082 User Guide - Page 19
Connecting the Router - setup
UPC - 745883556700
View all Cisco RV082 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
10/100 8-Port VPN Router Chapter 4: Connecting the Router Overview To set up your network, you will do the following: • Connect the Router to one of your PCs according to the instructions in this chapter. • If necessary, configure your PCs to obtain an IP address automatically from the Router, according to "Appendix G: Windows Help". (By default, Windows 98, 2000, Millennium, and XP computers are set to obtain an IP address automatically, so unless you have changed the default setting, then you will not need to configure your PCs.) • Set up and configure the Router with the setting(s) provided by your Internet Service Provider (ISP) according to "Chapter 5: Setting up and Configuring the Router." The installation technician from your ISP should have left the setup information with you after installing your broadband connection. If not, you can call your ISP to request the information. Once you have the setup information for your specific type of Internet connection, then you can begin installation and setup of the Router. Broadband: an always-on, fast Internet connection Notebook with Ethernet Adapter Cable or DSL Modem 10/100 8-Port VPN Router PC with Ethernet Adapter Figure 4-1: Example of a Typical Network Chapter 4: Connecting the Router 10 Overview