Cisco RV082 User Guide - Page 44
Port Management Tab - Port Status, Activity Enabled or Disabled, Priority High or Normal - vlan
UPC - 745883556700
View all Cisco RV082 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
10/100 8-Port VPN Router Speed: This allows you to manually configure the per-port speed as 10Mbps or 100Mbps. Duplex: This configures the port to half-duplex or full-duplex throughput. Auto Negotiation: If enabled, every LAN port will be set as auto negotiated, which will automatically manage speed and throughput. Half-Duplex: data transmission that can occur in two directions over a single line, but only one direction at a time. VLAN: For each LAN port, a VLAN (a Virtual LAN, or network within your network) can be established. Up to eight VLANs can be established. Click the Save Settings button to save the Port settings or click the Cancel Changes button to undo your changes. Port Management Tab - Port Status Users can choose the port number from the pull down menu to see the status of the selected port. The Summary table will show the settings for the selected port, such as Type, Link Status (up or down), Port Activity (Enabled or Disabled), Priority (High or Normal), Speed Status (10Mbps or 100Mbps), Duplex Status (Half or Full), Auto negotiation (Enabled or Disabled). The Statistics table will show the port receive/transmit packet count/packet byte count and Port Packet Error Count of the selected port. Click the Refresh button to refresh the port status. Figure 5-36: Port Management Tab - Port Status Chapter 5: Setting Up and Configuring the Router 35 Port Management Tab - Port Status