Cisco RV082 User Guide - Page 26
Firewall Setting Status, VPN Setting Status, Current Connected The Group Name of GroupVPN1 users - vpn configuration
UPC - 745883556700
View all Cisco RV082 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
10/100 8-Port VPN Router Firewall Setting Status SPI (Stateful Packet Inspection): This shows if the SPI status is On or Off, hyperlinked to that section of the Firewall Tab. DoS (Denial of Service): This shows if the DoS status is On or Off, hyperlinked to that section of the Firewall Tab. Block WAN Request: This shows if the Block WAN Request status is On or Off, hyperlinked to that section of the Firewall Tab. VPN Setting Status VPN Summary: This hyperlink will take you to the Summary page of the VPN Tab. Tunnel(s) Used: This displays the amount of VPN Tunnels used. Tunnel(s) Available: This displays the amount of VPN Tunnels available. Current Connected (The Group Name of GroupVPN1) users: This displays the amount of VPN users connected via GroupVPN1. Current Connected (The Group Name of GroupVPN2) users: This displays the amount of VPN users connected via GroupVPN2. (If GroupVPN is disabled, it will show "No Group VPN was defined.") Log Setting Status: This hyperlink will take you to the System Log page of the Log Tab. If you have not set up the Log's mail server, this will show "E-mail cannot be sent because you have not specified an outbound SMTP server address." If you have set up the mail server but the log has not come out due to Log Queue Length and Log Time Threshold settings, this will show "E-mail settings have been configured." If you have set up the mail server and the log has been sent to the mail server, this will show "E-mail settings have been configured and sent out normally." If you have set up the mail server and the log cannot be sent to mail server successfully, this will show "E-mail cannot be sent out, probably use incorrect settings." Chapter 5: Setting Up and Configuring the Router 17 System Summary Tab