Cisco SLM2008 Administration Guide - Page 10
Connecting the Cisco SLM2008 Switch, Placement Options - 8 port gigabit
UPC - 745883579969
View all Cisco SLM2008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3 Connecting the Cisco SLM2008 Switch This chapter will guide you through the hardware installation for the Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power. The following sections are included: • Placement Options, page 5 • Connecting the Cisco SLM2008 Switch to the Network, page 7 Placement Options When you choose a location for the switch, observe the following guidelines: • Make sure that the switch is accessible and that the cables can be easily connected. • Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures. • Position the switch away from water and moisture sources. • To ensure adequate air flow around the switch, be sure to provide a minimum clearance of two inches (50 mm). • Do not stack free-standing switches more than four units high. Desktop Option For desktop acement, set the Cisco SLM2008 switch horizontally on a surface so that it sits on its four rubber feet. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 5