Cisco SLM2008 Administration Guide - Page 9
Reset Button, Reboot, Restore Factory Defaults, Power Port, Security Slot - configuration
UPC - 745883579969
View all Cisco SLM2008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting to Know the Cisco SLM2008 Switch Side Panels 2 Reset Button-The reset button can be used to reset or reboot the switch. • Reboot-If the button is pressed for less than 10 seconds, the switch will reboot. • Restore Factory Defaults-If the button is pressed for longer than 10 seconds, the switch settings will be restored to the factory defaults and the system reboots. NOTE The switch can only be configured using the web-based utility. If you cannot access the web-based utility because of configuration changes you've made, you can reset the switch to the factory defaults. Power Port-The power port is where you will connect the AC power. The security slot is located on the left side panel of the switch. Security Slot-The security slot can be used to attach a lock to the switch. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 4