Cisco SLM2008 Administration Guide - Page 34

Security > 802.1X Settings, 1X Mode, Enabled, Disabled, RADIUS IP, RADIUS UDP Port, Key String

Get Cisco SLM2008 - Small Business Smart Switch PDF manuals and user guides
UPC - 745883579969
View all Cisco SLM2008 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Advanced Configuration Security 5 The Security > 802.1X Settings window displays the current 802.1X settings for the switch. To configure the 802.1X settings, follow these steps: STEP 1 Click Security > 802.1X Settings. STEP 2 In the 802.1X Settings section, enter the following information: • 802.1X Mode-Enables or disables 802.1X mode. From the drop-down menu select Enabled or Disabled. • RADIUS IP-Enter the IP address of the server. • RADIUS UDP Port-Enter the UDP Port of the server. The UDP port is used to verify the RADIUS server authentication. The default value is 812. • Key String-Enter the secret key string as defined on the RADIUS server. The secret key string is used for authenticating and encrypting communications between the device and the RADIUS server. Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Advanced Configuration
Security
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide
29
5
The Security > 802.1X Settings window displays the current 802.1X settings for
the switch.
To configure the 802.1X settings, follow these steps:
STEP 1
Click
Security > 802.1X Settings
.
STEP 2
In the 802.1X Settings section, enter the following information:
•
802.1X Mode
—Enables or disables 802.1X mode. From the drop-down
menu select
Enabled
or
Disabled
.
•
RADIUS IP
—Enter the IP address of the server.
•
RADIUS UDP Port
—Enter the UDP Port of the server. The UDP port is used
to verify the RADIUS server authentication. The default value is
812
.
•
Key String
—Enter the secret key string as defined on the RADIUS server.
The secret key string is used for authenticating and encrypting
communications between the device and the RADIUS server.