Cisco WAP200 Administration Guide - Page 30
Minimum rate, Maximum rate, Transmit/Receive
UPC - 745883574452
View all Cisco WAP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 2 How it works Chapter 2 Minimum rate Sets the minimum transmission rate that clients stations must meet in order to connect with this SSID. Client stations that are below this setting will not be able to connect to this SSID. Select the Lowest Available option to have the WAP-200 automatically adjust the data rate to its minimum setting based on the wireless mode being used. If the SSID spans two radios, then this setting can only be used if both radios are operating in the same wireless mode (a/b/g). Maximum rate Set the maximum transmission rate that clients stations must respect in order to connect with this SSID. Clients stations that attempt to associate at a higher data rate will be refused. Select the Highest Available option to have the WAP-200 automatically adjust the data rate to its maximum setting based on the wireless mode being used. If the SSID spans two radios, then this setting can only be used if both radios are operating in the same wireless mode (a/b/g). Transmit/Receive on Select the radio this SSID will operate on. The same SSID can be active on two radios at the same time, even if they are operating in different wireless modes. 30