Cisco WAP200 Administration Guide - Page 74
Descriptions - default username password
UPC - 745883574452
View all Cisco WAP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 2 How it works Chapter 2 Descriptions • Acct-Session-Id (32-bit unsigned integer): Random value generated per authentication by the WAP-200. • Called-Station-Id (string): BSSID of the VSC used by a wireless client, or the MAC address of the LAN port used by a wired client. By default, the MAC address is sent in IEEE format. For example: 00-02-03-5E-32-1A. This can be changed on the Security > 802.1x page. • Calling-Station-Id (string): The MAC address of the 802.1x client station. By default, the MAC address is sent in IEEE format. For example: 00-02-03-5E-32-1A. This can be changed on the Security > 802.1x page. • Framed-MTU (32-bit unsigned integer): Hard-coded value of 1496. • Message-Authenticator (string): As defined in RFC 2869. Always present even when not doing an EAP authentication. length = 16 bytes. • NAS-Identifier (string): The NAS ID set on the Security > RADIUS page for the RADIUS profile being used. • NAS-Ip-Address 32-bit unsigned integer): The IP address of the port the WAP-200 is using to communicate with the RADIUS server. • NAS-Port (32-bit unsigned integer): A virtual port number starting at 1. Assigned by the WAP-200. For 802.1x, this field is always set to 0. • NAS-Port-Type (32-bit unsigned integer): Always set to 19, which represents WIRELESS_802_11.) • Service-Type (32-bit unsigned integer): Set to Framed-User. • State (string): As defined in RFC 2865. • User-Name (string): The username assigned to the user. Or if MAC-authentication is enabled, the MAC address of the wireless client station. The following attributes are mutually exclusive depending on the RADIUS authentication method. • User-Password (string): The password supplied by a user or device when logging in. Encoded as defined in RFC 2865. Only present when the authentication scheme on the Security > RADIUS > Profile 1 page is set to PAP/SecurID. Or if MACauthentication is enabled, the MAC address of the wireless client station. • EAP-Message (string): As defined in RFC 2869. Only present when the authentication scheme on the Security > RADIUS > Profile 1 page is set to EAPMD5. • Colubris-AVPair (SSID): SSID that the customer is associated with. 74