Cisco WAP200 Administration Guide - Page 75
Access Accept, Access Reject
UPC - 745883574452
View all Cisco WAP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 2 How it works Chapter 2 Access Accept Attribute Class EAP-Message MS-MPPE-Recv-Key MS-MPPE-Send-Key Session-TImeout Termination-Action Tunnel-Medium-Type Tunnel-Private-Group-ID Tunnel-Type Web Admin 802.1x MAC Descriptions • Class (string): As defined in RFC 2865. Multiple instances are supported. • EAP-Message (string): Note that the content will not be read as the RADIUS Access Accept overrides whatever indication is contained inside this packet. • MS-MPPE-Recv-Key: As defined by RFC 3078. • MS-MPPE-Send-Key: As defined by RFC 3078. • Session-Timeout (32-bit unsigned integer): Maximum time a session can be active. After this interval, the 802.1x client is re-authenticated. • Termination-Action: As defined by RFC 2865. If set to 1, customer traffic is not allowed during the 802.1x re-authentication. • Tunnel-Medium-Type = Only used when assigning a specific VLAN number to a customer. In this case it must be set to 802. • Tunnel-Private-Group-ID = Only used when assigning a specific VLAN number to a customer. In this case it must be set to the VLAN ID. • Tunnel-Type: Only used when assigning a specific VLAN number to a customer. In this case it must be set to VLAN. Access Reject None. 75