Cisco WS-C3560X-48PF-L Hardware Installation Guide - Page 19

Installing SFP and, SFP+ Modules on Appendix B, Connector and Cable - s end of support

Get Cisco WS-C3560X-48PF-L PDF manuals and user guides View all Cisco WS-C3560X-48PF-L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Chapter 1 Product Overview Front Panel Description LEDs Table 1-4 Supported Cisco SFP Modules (continued) Part Number Description DWDM-SFP-5898= DWDM SFP 1558.98-nm SFP (100 GHz ITU grid) DWDM-SFP-5979= DWDM SFP 1559.79-nm SFP (100 GHz ITU grid) DWDM-SFP-6061= DWDM SFP 1560.61-nm SFP (100 GHz ITU grid) DWDM-SFP-6141= DWDM SFP 1561.42-nm SFP (100 GHz ITU grid) 1. Not supported in the SFP+ slots (2 and 4) on the C3KX-NM-10G. 2. Not supported on the C3KX-SM-10G 3. Not supported for NEBS. 4. DOM = digital optical monitoring. Table 1-5 Supported Cisco SFP+ Modules Part Number SFP-10G-LR= SFP-10G-SR= SFP-10G-LRM= SFP-H10GB-CU1M= SFP-H10GB-CU3M= SFP-H10GB-CU5M= Description 10 GBASE LR SFP+ transceiver module for SMF, 1350 nm, LC duplex connector 10 GBASE SR SFP+ transceiver module for MMF, 850 nm, LC duplex connector 10 GBASE-LRM SFP+ module for MMF and SMF, 1310 nm 10 GBASE-CU Twinax SFP+ cable assembly, 1 meter (Version -02) 10 GBASE-CU Twinax SFP+ cable assembly, 3 meters (Version -02) 10 GBASE-CU Twinax SFP+ cable assembly, 5 meters (Version -02) For information about SFP modules, see your SFP module documentation and the "Installing SFP and SFP+ Modules" section on page 2-24. For cable specifications, see Appendix B, "Connector and Cable Specifications." The Catalyst 3560-X switch supports the SFP module patch cable (CAB-SFP-50CM), a 0.5-meter, copper, passive cable with SFP module connectors at each end. This cable is only used with 1-Gigabit Ethernet SFP ports to connect two Catalyst 3560-X switches in a cascaded configuration. You can use the switch LEDs to monitor switch activity and its performance. Figure 1-3 shows the Catalyst 3750-X switch LEDs and the Mode button that you use to select a port mode. OL-19593-02 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide 1-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
1-9
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
OL-19593-02
Chapter 1
Product Overview
Front Panel Description
For information about SFP modules, see your SFP module documentation and the
“Installing SFP and
SFP+ Modules” section on page 2-24
. For cable specifications, see
Appendix B, “Connector and Cable
Specifications.”
The Catalyst 3560-X switch supports the SFP module patch cable (CAB-SFP-50CM), a 0.5-meter,
copper, passive cable with SFP module connectors at each end. This cable is only used with 1-Gigabit
Ethernet SFP ports to connect two Catalyst 3560-X switches in a cascaded configuration.
LEDs
You can use the switch LEDs to monitor switch activity and its performance.
Figure 1-3
shows the
Catalyst 3750-X switch LEDs and the Mode button that you use to select a port mode.
DWDM-SFP-5898=
DWDM SFP 1558.98-nm SFP (100 GHz ITU grid)
DWDM-SFP-5979=
DWDM SFP 1559.79-nm SFP (100 GHz ITU grid)
DWDM-SFP-6061=
DWDM SFP 1560.61-nm SFP (100 GHz ITU grid)
DWDM-SFP-6141=
DWDM SFP 1561.42-nm SFP (100 GHz ITU grid)
1.
Not supported in the SFP+ slots (2 and 4) on the C3KX-NM-10G.
2.
Not supported on the C3KX-SM-10G
3.
Not supported for NEBS.
4.
DOM = digital optical monitoring.
Table 1-5
Supported Cisco SFP+ Modules
Part Number
Description
SFP-10G-LR=
10 GBASE LR SFP+ transceiver module for SMF, 1350 nm,
LC duplex connector
SFP-10G-SR=
10 GBASE SR SFP+ transceiver module for MMF, 850 nm,
LC duplex connector
SFP-10G-LRM=
10 GBASE-LRM SFP+ module for MMF and SMF, 1310 nm
SFP-H10GB-CU1M=
10 GBASE-CU Twinax SFP+ cable assembly, 1 meter (Version -02)
SFP-H10GB-CU3M=
10 GBASE-CU Twinax SFP+ cable assembly, 3 meters (Version -02)
SFP-H10GB-CU5M=
10 GBASE-CU Twinax SFP+ cable assembly, 5 meters (Version -02)
Table 1-4
Supported Cisco SFP Modules (continued)
Part Number
Description