Cisco WS-C3560X-48PF-L Hardware Installation Guide - Page 49
Rack-Mounting, To prevent bodily injury when mounting or servicing this unit in a rack
![]() |
View all Cisco WS-C3560X-48PF-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 Switch Installation Installing the Switch Rack-Mounting To install the switch in a 19-inch rack, follow the instructions described in this section. Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: • This unit should be mounted at the bottom of the rack if it is the only unit in the rack. • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006 The 19-inch brackets are included with the switch. Installing the switch in other rack types requires an optional bracket kit not included with the switch. Figure 2-15 shows the mounting brackets and part numbers. OL-19593-02 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide 2-15
![](/manual_guide/products/cisco-wsc3560x48pfl-hardware-installation-guide-0cefc4c/49.png)