Cisco WS-C3560X-48PF-L Hardware Installation Guide - Page 35
Switch Installation, Preparing for Installation, Safety Warnings
View all Cisco WS-C3560X-48PF-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Switch Installation 2 C H A P T E R This chapter describes how to install and connect a Catalyst 3750-X or a 3560-X switch. It also includes planning and cabling considerations for stacking switches (only Catalyst 3750-X switches). Read the topics and perform the procedures in this order: • Preparing for Installation, page 2-1 • Planning a Switch Data Stack (Catalyst 3750-X Switches), page 2-4 • Planning a StackPower Stack (Catalyst 3750-X Switches), page 2-8 • Installing the Switch, page 2-14 • Connecting to the StackWise Ports (Catalyst 3750-X Switches), page 2-20 • Installing a Network Module in the Switch, page 2-22 • Installing SFP and SFP+ Modules, page 2-24 • Connecting Devices to the Ethernet Ports, page 2-26 • Where to Go Next, page 2-29 For initial switch setup, how to assign the switch IP address, and for powering information, see the switch getting started guide on Cisco.com. Preparing for Installation • Safety Warnings, page 2-1 • Installation Guidelines, page 2-3 • Tools and Equipment, page 2-4 Safety Warnings This section includes the basic installation caution and warning statements. Translations of the warning statements appear in the Regulatory Compliance and Safety Information for the Catalyst 3750-X and 3560-X Switch document available at Cisco.com. Read this section before you start the installation procedure. OL-19593-02 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide 2-1