Cisco X2000 User Manual - Page 17

Linksys X2000/X3000 L2TP Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to connections in Israel. Telstra Cable Telstra Cable is a service that generally applies to connections in Australia. Network Setup The Network Setup section configures the IP settings for your local network. Wireless > Basic Wireless Settings Note To learn more about any field, click Help on the right side of the screen. The basic settings for wireless networking are set on this screen. There are two ways to configure the Router's wireless network(s), manual and Wi-Fi Protected Setup. Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless network. If you have client devices, such as wireless adapters, that support WiFi Protected Setup, then you can use Wi-Fi Protected Setup. Configuration View To manually configure your wireless networks, select Manual. Advanced Configuration Manual setup Set up the wireless network on this screen. Note After you set up the wireless network(s), set up the wireless security settings. Go to "Wireless > Wireless Security" on page 19. Network Mode In most network configurations, you should leave it set to Mixed (default). Wireless settings Basic Wireless Settings (Manual) > Wireless Settings Network Mode Select the wireless standards your network will support. •• Mixed If you have Wireless-N, Wireless-G, and Wireless-B devices in your network, keep the default, Mixed. •• Wireless-B/G Only If you have both Wireless-B and Wireless-G devices in your network, select Wireless-B/G Only. •• Wireless-B Only If you have only Wireless-B devices, select Wireless-B Only. •• Wireless-G Only If you have only Wireless-G devices, select Wireless-G Only. 17