Cisco X2000 User Manual - Page 22

Linksys X2000/X3000 RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Key Enter the key shared between the router and the server. WEP WEP is a basic encryption method, which is not as secure as WPA. Note If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and shared key. Advanced Configuration RADIUS This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the router.) Note If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. TX Key Select a default TX (Transmit) Key to use. The default is 1. RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Secret Enter the key shared between the router and the server. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. TX Key Select a default TX (Transmit) Key to use. The default is 1. 22