Compaq 400338-001 HP J1473A 4-port, J1474A 8-port, J1475A Console Switch Rackm - Page 40
B: FLASH, Upgrading
UPC - 743172745156
View all Compaq 400338-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Rackmount Console Switch Owner's Manual B: FLASH Upgrading Hardware/Software Requirements: • Rackmount console switch • Serial host system (i.e. laptop or desktop computer) • 9-pin straight pass non-null modem serial cable (RS-232) • HyperTerminal or other terminal emulation software (HyperTerminal is included with MS Windows 95, 98, NT, and 2000) • FLASH code file (downloaded firmware revision) To upgrade the FLASH code on your Rackmount Console Switch, you will first need to determine if your unit is running A or B revision code. To do this, select the menu choice 'Version Information' from the Command menu. The first letter of the revision code displayed will determine if your unit uses the A or B code. Hewlett Packard Console Switch Administrator Command Menu Add Port Edit Port Delete Port Administrative Functions Scanning is OFF Reset Standard Mse/Kbd Reset Wheel Mse/Kbd Version Information ENTER = activate ESC = exit Hewlett Packard Console Switch Version Information Firmware Version A06 Press ESC to exit A Rev Code Hewlett Packard Console Switch Version Information Firmware Version B10 Press ESC to exit B Rev Code You will next need to obtain the latest FLASH firmware revision from Hewlett-Packard. It is available through the Hewlett-Packard web site at www.hp.com/go/enclosures. 34 www.hp.com/racksolutions