Compaq 6000 Maintenance & Service Guide: HP Compaq 6000 and 6080 Pro Busin - Page 86
Replacing the Thermal Sensor, Replacing the Carrier Cover
UPC - 894582579463
View all Compaq 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2). Figure 7-36 Replacing the Thermal Sensor 9. Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover in place (2). Figure 7-37 Replacing the Carrier Cover 10. Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided. NOTE: The carrier must be locked for power to be supplied to the hard drive. 76 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
8.
Place the thermal sensor on top of the hard drive in a position that does not cover the label
(1)
and attach the thermal sensor to the top of the hard drive with the adhesive strip
(2)
.
Figure 7-36
Replacing the Thermal Sensor
9.
Slide the cover on the carrier
(1)
and replace the screw on the rear of the carrier to secure the
cover in place
(2)
.
Figure 7-37
Replacing the Carrier Cover
10.
Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.
NOTE:
The carrier must be locked for power to be supplied to the hard drive.
76
Chapter 7
Removal and Replacement Procedures Microtower (MT) Chassis