Compaq dc5850 Service Reference Guide: HP Compaq dc5850 Business PC - Page 138
socket on the system board, When installing an expansion card
View all Compaq dc5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation. 8. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board (2). NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot. 9. Rotate the slot cover retention latch back in place to secure the expansion card. 126 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis