Compaq dc5850 Service Reference Guide: HP Compaq dc5850 Business PC - Page 141
Drives, Drive Positions, Setup. Refer to
View all Compaq dc5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Drives A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive. CAUTION: Make sure personal files on the hard drive are backed up to an external storage device before removing the hard drive. Failure to do so will result in data loss. After replacing the primary hard drive, you will need to run the Restore Plus! CD to load the HP factory-installed files. Drive Positions 1 3.5-inch internal hard drive bay 2 3.5-inch external drive bay for optional drives (media card reader shown) 3 5.25-inch external drive bay for optional drives (optical drive shown) NOTE: The 3.5-inch external drive bay can also be configured with a secondary internal hard drive covered by a bezel blank. To verify the type, size, and capacity of the storage devices installed in the computer, run Computer Setup. Refer to the Computer Setup (F10) Utility Guide for more information. Drives 129