Craftsman 28974 Operation Manual - Page 23
A broken or missing - lawn mower parts
View all Craftsman 28974 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
tc;6n "ON" tacia arriba o _ntes supeando ningu- pendiente iota de este antes de arajo en cerros. idad en cerros. el parar, tamente a la el freno de movimienlo, estaciona- )piado hasta la ctor asegQrese poniendo )osici6n de I de marcha de 'ra de tracci6n amiento del ac- con el control rio. )re hacia _ese coloque ira que se man,nganchada. r a m&s de dos _misi6n, invierta contra e! daSo cami6n o remol- cerrado y ase_propiados para , cordeles, etc.). _da lada DECK WASHOUT PORT Your tractor's deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use. I. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach. IMPORTANT: Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached. 2. Make sure the PTO (Blade Engage) is not engaged, set the parking brake, and stop the engine. 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose. 4. Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle. 10. Move the tractor to a dry area, preferably a concrete or paved area. Engage the mower deck PTO to remove excess water and to help dry before putting the tractor away. _WARNING: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade. , Replace broken or missing washout fitting immediately, prior to using mower again. • Plug any holes in mower with bolts and Iocknuts. Nozzle Aria Washou[ Port IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on, 6. While sitting in the operator's position on the tractor, re-start the engine and place the throttle lever in the Fast "_" position. IMPORTANT: Recheck the area making certain the area is clear. 7. Movethetractor'sPTO(BladeEngage) to the ON position. Remain in the operator's position with the cutting deck engaged until the deck is cleaned. 8. Movethetractor's PTO (Blade Engage) to the OFF position. Turn the ignition key to the STOP position to turn the tractor's engine off, Turn the water off, 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. 23