Craftsman 28974 Operation Manual - Page 31
TROUBLESHOOTING, CHART, See appropriate, in manual, unless, directed, Sears, service,
View all Craftsman 28974 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
que no se han actor fuera de instrucciones "edera. lpezar, leer, Jcciones aciones de tractor est6 en so qua la zona _tras personas "RACTOR A (Vea la ra la Iocalitroles) amiento del alta, niento presionlibra en la lsenganchar TRANSPOR_ci6n de este elante fuera de TERA DE LA na arandeta y la rueda delo se ilustra en la TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PRO B LEM CAUSE CORRECTION Will not start Hard to start Engine will not turn over 1 Out of fuel. 2 Engine not "CHOKED" properfy, 3 Engine flooded, 4 Bad spark plug. 5 Dirty air filter. 6 Dirty fuel filter. 7 Water in fuel. 8 Loose or damaged wiring. 9 Carburetor out of adjustment. 10 Engine valves out of adjustment. 1 Dirty air filter. 2 Bad spark plug. 3 Weak or dead battery, 4 Dirty fuel filter. 5 Stale or dirty fuel. 6 Loose or damaged wiring. 7 Carburetor out of adjustment. 8 Engine valves out of adjustment. 1 Brake pedal not depressed. 2 Attachment clutch is engaged. 3 Weak or dead battery° 4 Blown fuse. 5 Corroded batten/termfnals. 6 Loose or damaged wiring. 7 Faulty ignition switch. 8 Faulty solenoid or starter, 9 Faulty operator presence swttch(es). 1 Fill fuel tank, 2 See "TO START ENGINE" in Operation section. 3 Wait several minutes before attempting to start. 4 Replace spark plug. 5 Clean/replace air filter. 6 Replace fuel filter. 7 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. 8 Check all wiring. 9 See "To Adjust Carburetor" in Service and Adjustments section. 10 Contact a Sears or other qualified service center. 1 Clean/replace air filter. 2 Replace spark plug. 3 Recharge or reptace battery. 4 Replace fuel filter. 5 Empty fue! tank and refill tank with fresh, clean gasoline. 6 Check allwiring. 7 See "To Adjust Carburetor" in Service and Adjustments section. 8 Contact a Sears or other qualified service center. 1 Depress brake pedal. 2 Disengage attachment clutch. 3 Recharge or reptace battery. 4 Replace fuse. 5 Clean battery terminals. 6 Check all wiring. 7 Check/replace ignition switch. 8 Check/replace solenoid or starter. 9 Contact a Sears or other qualified service center. 31