Craftsman 28974 Operation Manual - Page 24

Para Ajus'i

Get Craftsman 28974 - Professional PGT 9000 28 HP/54inch Garden Tractor PDF manuals and user guides View all Craftsman 28974 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1, Depress brake pedal fully and set parking brake. 2. Place attachment clutch in "DISENGAGED" position. 3. Turn ignition key to "STOP" and remove key, 4. Make sure the blades and all moving parts have completely stopped, 5. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REiV1OVE MOWER 1. Place attachment clutch in "DISEN- GAGED" position, 2, Lower attachment lift lever to its lowest position. 3. Disengage belt tension rod (K) from lock bracket (L), _, CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and release slowly. 4. Remove mower belt from electric clutch pulley (M), 5. Disconnect front link (E) from mower - remove retainer spring and washer. 6. Go to either side of mower and discon- nect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers, 7. Go to other side of mower and discon- nect the suspension arm and rear lift link. CAUTION: After rear lift links are dis- connected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of tile lever. 8, From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket. 9. Turn tractor steering wheel to the left as far as it will go. 10.Slide mower out from under right side of tractor. TO INSTALL MOWER Follow procedure described in "INSTALL MOWER AND DRIVE BELT" in the As- sembly section of this manual, MOVERSE HI ATRAS La direcci6n y est&n controta, adelante y atr_ 1. Poneren r de mano. 2. Apretar ler (K) y atra's se aprieta UTILIZAR EL E1mando cruc la marcha hac CARACTERi5 El control de v mientras el t_ o transportac cies que est6 Otras condicic que requiere desengranar € No emplee el, mientras et tra terrenos escal en labores de 1. Con elpe( apretado palanca d{ ante haste mientras s soltar la p_ Para descone pujar la palan_ "OFF", o apre" freno. PARA AJUS'I LA SEGADOI La posici6n d_ mina a qu6 al! , Coloque la de la a]tura 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
WARNING:
TO AVOID
SERIOUS
INJURY,
BEFORE
PERFORMING
ANY
SER-
VICE
OR ADJUSTMENTS:
1,
Depress
brake
pedal
fully
and set parking
brake.
2.
Place
attachment
clutch
in "DISENGAGED"
position.
3.
Turn
ignition
key to "STOP"
and
remove
key,
4.
Make
sure
the blades
and
all
moving
parts
have
completely
stopped,
5.
Disconnect
spark
plug wire
from
spark
plug and
place
wire
where
it
cannot
come
in
contact
with
plug.
TO
REiV1OVE
MOWER
1.
Place
attachment
clutch
in "DISEN-
GAGED"
position,
2,
Lower
attachment
lift lever
to its lowest
position.
3.
Disengage
belt tension
rod
(K) from
lock
bracket
(L),
_,
CAUTION:
Belt
tension
rod is spring
loaded.
Have
a tight
grip on rod and
release
slowly.
4.
Remove
mower
belt from
electric
clutch
pulley
(M),
5.
Disconnect
front
link
(E) from
mower
- remove
retainer
spring
and washer.
6.
Go to either
side
of mower
and discon-
nect
mower
suspension
arm
(A) from
chassis
and
rear
lift link
(C) from
rear
mower
bracket
(D) - remove
retainer
springs
and washers,
7.
Go to other
side
of mower
and discon-
nect the suspension
arm
and
rear lift
link.
CAUTION:
After
rear
lift links
are dis-
connected,
the attachment
lift lever
will
be
spring
loaded.
Have
a tight
grip
on lift lever
when
changing
position
of tile
lever.
8,
From
right
side
of mower,
disconnect
anti-sway
bar
(S) from
right
rear
mower
bracket
(D) - remove
retainer
spring
and washer
and
pull
mower
toward
you until
the bar falls
from
the hole in
bracket.
9.
Turn tractor
steering
wheel
to the left
as far as it will
go.
10.Slide
mower
out from
under
right
side
of tractor.
TO
INSTALL
MOWER
Follow
procedure
described
in "INSTALL
MOWER
AND
DRIVE
BELT"
in the As-
sembly
section
of this
manual,
MOVERSE HI
ATRAS
La direcci6n y
est&n controta,
adelante y atr_
1.
Poneren
r
de mano.
2.
Apretar ler
(K) y atra's
se aprieta
UTILIZAR
EL
E1mando cruc
la marcha hac
CARACTERi5
El control de v
mientras
el t_
o transportac
cies que est6
Otras condicic
que requiere
desengranar
€
No emplee el,
mientras et tra
terrenos escal
en labores de
1.
Con elpe(
apretado
palanca d{
ante haste
mientras
s
soltar la p_
Para descone
pujar la palan_
"OFF", o apre"
freno.
PARA AJUS'I
LA
SEGADOI
La posici6n d_
mina a qu6 al!
,
Coloque la
de la a]tura
24