Cub Cadet CC 760ES CC 760ES Operator's Manual - Page 21

Adjustments - timing belt

Get Cub Cadet CC 760ES PDF manuals and user guides View all Cub Cadet CC 760ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

2. The top of each spindle pulley is marked with an arrow. See Fig. 6-6. The arrows should be perpendicular (at a 90˚ angle) to each other. Adjustments WARNING! Shut the engine off and remove the ignition key (if so equipped) before making adjustments. Handle Height The upper handle is secured to two support bars that can be adjusted to raise or lower the handle height. Adjust if necessary as follows: 1. Remove the upper star knob and carriage screw on the right side of the handle and the left side of the handle. See Fig. 6-7. Figure 6-6 3. If the arrows on the surface of each spindle pulley are not perpendicular (at a 90˚ angle) to each other, see your Cub Cadet dealer to have the deck's timing belt reset. WARNING! Do not operate the machine without the deck's timing belt properly set. Failure to follow this instruction could result in personal injury or property damage. Figure 6-7 2. Pivot the handle forward or rearward to align one of the three holes on each support bar with the holes on the handle. 3. Reinstall the upper star knob and carriage screw on the right side of the handle and the left side of the handle when a comfortable height is achieved. Section 6 - Maintenance & Adjustments 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
The top of each spindle pulley is marked with an arrow.
2.
See Fig. 6-6. The arrows should be perpendicular (at a 90˚
angle) to each other.
If the arrows on the surface of each spindle pulley are not
3.
perpendicular (at a 90˚ angle) to each other, see your Cub
Cadet dealer to have the deck’s timing belt reset.
WARNING!
Do not operate the machine without
the deck’s timing belt properly set. Failure to follow
this instruction could result in personal injury or
property damage.
Adjustments
WARNING!
Shut the engine off and remove the
ignition key (if so equipped) before making
adjustments.
Handle Height
The upper handle is secured to two support bars that can be
adjusted to raise or lower the handle height. Adjust if necessary
as follows:
Remove the upper star knob and carriage screw on the
1.
right side of the handle and the left side of the handle.
See Fig. 6-7.
Pivot the handle forward or rearward to align one of the
2.
three holes on each support bar with the holes on the
handle.
Reinstall the upper star knob and carriage screw on the
3.
right side of the handle and the left side of the handle
when a comfortable height is achieved.
Figure 6-7
Figure 6-6
21
S
ECTION
6 — M
AINTENANCE
& A
DJUSTMENTS